Go to Wireless > Bridging and disable "Ethernet MAC cloning." This allows multiple devices on the wired side to communicate, provided they have unique IP addresses.
If all else fails:
| Setting | Recommendation | |---------|----------------| | | Use 5 GHz for less interference and higher throughput (if your AP supports it). | | Channel Width | 20 MHz for reliability in noisy environments; 40 MHz for higher throughput. | | TX Power | Leave at auto unless you need to limit range. | | SSID Hiding | Can connect to hidden SSIDs – manually enter SSID name. | | Management Access | Disable HTTP; use HTTPS. Change default admin password. | aruba 501 wireless client bridge setup
Once logged in, you will configure the bridge to connect to your existing wireless network (the "Station Profile"). Go to Wireless > Bridging and disable "Ethernet MAC cloning